fire retardant fabric logo

2653 Warfield Street Fort Worth, TX 76106

Flame Safe FIRE RETARDANT Coatings / Flame Retardants

Hotline: 800-333-9197 8am-5pm (CST) Ph: 817-740-9197

After Hours: 817-658-9197 email: fireprod@aol.com

 
Dallas, Fort Worth, Houston, Austin,South Dallas, North Dallas, Dallas County, Houston, Corpus Christi, San Antonio, DFW metroplex, Dallas - Fort Worth, Abilene, Amarillo, Odessa, Midland, El Paso
CONTACT US FIRE RETARDANT WOOD Fabric Safe MSDS
Fire Retardant Coatings - Flame Retardant Coatings - Fire Retardant Sprays

NFPA 701, FAR 25.853 a & b, CAL TECH 117-F, CFR 1632.4 (FF 4-72) Fire Retardant Coating for mattress ticking and padding , NY-NJ PORT, BOSTON extinguishing time, drip-sec, and AFGL-sec, CALIF 1237.1

fire retardant fabric logo

TECHNICAL DATA

Interior Fire Retardant Spray Coating for Fabric & Textiles

PRODUCT DESCRIPTION:    Aqueous Based Resin

PRODUCT ANALYSIS
Total Solids
18%   PH
6.4
Weight per gallon
9.1 lbs Flash point
Non-Flammable
Specific gravity
1.104 Color
Water clear at 78°F. - Slight haze at 50°F. or lower
Volatability
Non-Volatile Solvents
Water(Contains no petroleum or derivatives of petroleum)
Anti-Fungus
excellent Resistance Bacterial
Good Resistance
Linear shrinkage
None Moisture Absorption
None
Corrosive
Mildly Toxic
None (when dry)
Insects, rodents,
aspergilli And other types of molds
Excellent resistance Termites
Excellent resistance
       

RECOMMENDED USE: Interior

FLAME SAFE FABRIC SAFE is a fire retardant coating that can be spray applied to all natural and most synthetic and synthetic blend fabrics, such as

Carpet Cotton Polyester
Draperies Synthetic blends Wall Coverings
Mattresses Theater Drapes Curtains

ENVIRONMENTAL REGULATION:

This product complies will U. S. Federal Regulations concerning the use of lead in paint and hydrocarbon emissions.


fire retardant fabric logo

QUICK REFERENCE FOR APPLYING FABRIC SAFE FIRE RETARDANT COATING

MATERIAL
APPLICATION
COVERAGE
Textiles/Fabrics

Treat with fire retardant according to manufacturer’s specifications

Apply with a mist applicator held 6" -8” from surface

Allow to dry before use.

Treat both sides where possible.

300 - 500 sq. ft. per gallon.

Do not saturate, retardant will easily penetrate material.

Fabric Areas

Apply with spray applicator.

Apply to all sides and interior of pillows, seat cushions and underside of chairs and sofas.

Check for color fastness by apply a small amount of retardant to an obscure area

Treat until damp to touch.

Turn stuffed chairs and couches over, remove back cover, treat inner parts of items, replace backing material.

Wallpaper, wall covering Apply chemical with mist applicator or sponge. Treat until damp.

Carpet

 

Apply with spray applicator.

Treat until damp.

INTERIOR :
Fire retardant spray coating treatment of drapes, furniture, artificial flowers, carpets and wall coverings with Fabric Safe, gives excellent protection against ignition, flame spread and afterglow. It forms a barrier which inhibits ignition of the treated material and restricts the char to the immediate area touched exposed to flame. Fabric Safe is a water-based, clear, odorless and non-toxic fire retardant coating. All surfaces to be treated must be clean. Due to the vast variety of textiles and fabrics, it is important to check for color fastness. This is done by applying a small amount of Fabric Safe fire retardant to an obscure area and letting it dry ( a hair dryer will aid in drying). Apply Fabric Safe fire retardant coating as it comes from the container. DO NOT DILUTE OR MIX FABRIC SAFE WITH ANY OTHER PRODUCTS. The coverage rate of Fabric Safe is 300 to 500 square feet per gallon depending on the type and weight of the material being treated. Fabric Safe, in most instances is applied with a mist applicator. A sponge can be an effective method of applying the retardant on wallpaper and wall coverings. All treated textiles/fabrics lose some of their fire retardant qualities after deep cleaning, therefore re-treatment with Fabric Safe is necessary to achieve maximum results. Pile or high tufted carpet in particular, is suitable for treatment immediately after cleaning. Be sure all materials are dry before applying Fabric Safe.

drapes

 

Call for pricing and ordering 1-800-333-9197

CAUTION:

          Product must not freeze. It must not be thinned or diluted.

OVERSPRAY:

        The overspray will not harm plants or animals. Spills can be flushed with water. A rag wetted with   bleach and water mix will clean up spotting.

CLEAN UP PROCEDURE:

          Airless Equipment.

1. Run clear water through the system until coating is flushed out. When minor sudsing on surface stops, the system is flushed.

2. Run bleach and water mix (1 part to 4 parts) through system as solvent for cleaning any residue.

            3. Repeat Step 1 if any foaming occurs in Step 2.

            4. Lubricate system as specified by equipment manufacturer to combat rusting.

If two or more applications are planned in the same day, the sprayer can be kept clean by running water through the system between applications.

          Brushes/Rollers.

              1. Clean immediately after use.

              2. Wash thoroughly with bleach and water mix (1 part to 4 parts).

SAFETY FIRST

Use approved safety devices (ropes, belts, ridge hooks, ladder, etc.) When working on steep or high areas. Take EXTREME CARE not to step on wet treated area. Surface may be slick until dry.

It is good practice to wear respirator or mask and protect hands with rubber gloves when spraying any coating or chemical. When engineered air control is not feasible, use properly maintained and properly fitted NIOSH approved respirator for solvent vapors. A dusk mask does not provide protection against vapors.

If eye contact occurs, flood with water for fifteen (15) minutes and call a physician. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY.

interior drapes fabric covered  chair wallpaper fabric

HOME | CONTACTS | FIRE RETARDANT WOOD | Fabric Safe MSDS | Testing

Call for pricing and ordering 1-800-333-9197