FIRE RETARDANT SPRAY

EXTERIOR FIRE RETARDANT COATING FOR CANVAS

TEST Material tested
100% Cotton 100% Synthetic
RESULTS

ASTM D4372
CFR 1632.4
(FF 4-72)

FAR 25.853 a & b
CALIF 1237.1
NFPA 701
CAL TECH 117-F
NY-NJ PORT
BOSTON
Canvas Materials:
Cotton
Polyester
Cotton/Polyester Blends

Passed
Passed
Passed


FABRIC SAFE TECHNICAL DATA

Exterior Fire Retardant Spray Coating
for Canvas Materials

PRODUCT DESCRIPTION:    Aqueous Based Resin


Product
Analysis
Total Solids
26.7 - 31.5%
PH
4.5 - 5.2
Weight per gallon
9.4 lbs
Flash point
Non-Flammable
Specific gravity
1.10
Color
Water clear at 78°F. - Slight haze at 50°F. or lower
Volatability
Non-Volatile
Solvents
Water(Contains no petroleum or derivatives of petroleum)
Anti-Fungus
Excellent Resistance
Bacterial
Good Resistance
Linear shrinkage
None
Moisture Absorption
None
Corrosive
Mildly
Toxic
None
Insects, rodents,
aspergilli And other types of molds
Excellent resistance
Not harmful to
plants

RECOMMENDED USE: Exterior

FLAME SAFE FABRIC SAFE is a fire retardant that can be applied to materials such as:

Canvas Tents Burlap Canvas Awnings
Wall Coverings    


ENVIRONMENTAL REGULATION:

      This product complies with U. S. Federal Regulations concerning the use of lead in paint and hydrocarbon emissions.

Tent Cabana


QUICK REFERENCE FOR APPLYING FABRIC SAFE


MATERIAL APPLICATION COVERAGE
Canvas Textiles/Fabrics

Treat with retardant according to manufacturer's specifications

Apply with a mist applicator held 6" -8" from surface

Allow to dry before use

Treat both sides where possible

200 - 300 sq. ft. per gallon

Do not saturate, retardant will easily penetrate material

EXTERIOR:

      Treatment of canvas tents and awnings with Fabric Safe for canvas, gives excellent protection against ignition, flame spread and afterglow. Fabric Safe fire retardant forms a barrier which inhibits ignition of the treated material and restricts the char to the immediate area touched exposed to flame. Fabric Safe for canvas is a water-based, clear, odorless and non-toxic fire retardant. All surfaces to be treated must be clean.

Due to the vast variety of textiles and fabrics, it is important to check for color fastness.      This is done by applying a small amount of fire retardant to an obscure area and letting it dry.

Apply fire retardant as it comes from the container.

DO NOT DILUTE OR MIX FABRIC SAFE WITH ANY OTHER PRODUCTS.

      The coverage rate of Fabric Safe 2 fire retardant is 200 to 300 square feet per gallon depending on the type and weight of the material being treated. Fabric Safe, in most instances is applied with a mist applicator. Be sure all materials are dry before applying Fabric Safe 2. Re treatment of the material should be done after 5 years or 200 inches of rain whichever comes first. A water based moisture sealer can be applied after applying Fabric Safe for canvas.

CAUTION:

           Product must not freeze. It MUST NOT be thinned or diluted.


OVERSPRAY:

         The overspray will not harm plants or animals. Spills can be flushed with water. A rag wetted with bleach and water mix will clean up spotting.



CLEAN UP PROCEDURE:

           1. Run bleach and water mix through spray mist applicator for cleaning any residue.

           2. Rinse sponges with bleach and water mix.

SAFETY FIRST:

      If eye contact occurs, flood with water for fifteen (15) minutes and call a physician. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY.


CAUTION:

Check for color fastness of material being treated

Call for pricing and ordering 1-800-333-9197
HOME CONTACT US FIRE RETARDANT WOOD Fabric Safe MSDS Testing